Tri-Polar Magnetic Circuitry is new and revolutionary for use in Magnetic Separators and Cross Belt Magnets. It is the ultimate in Permanent Magnet technology, not available from any other magnet system manufacturer in North America. Shields Magnetic Separators and Stationary Separators utilize this computer designed circuitry using a large and costly 13-Ton Magnetizer, one of only three in the world.
Most magnet system manufacturers typically magnetize ceramic blocks before forming the circuit in a stainless steel box. Due to the nature of magnets, they want to repel each other, there is a limitation as to how many blocks can be stacked on top of each other. Shields Stationary Separators and Magnetic Separators form their circuit in the stainless steel box prior to magnetizing. After the circuit is arranged and box is sealed, it is immersed in the 13 Ton Magnetizer for three (3) separate charging sessions, thoroughly magnetizing the system creating the Tri-Polar Magnetic Circuitry.
With Tri-Polar Magnetic Circuitry as part of the larger Permanent Magnet series, both in Stationary Separators and Cross Belt Separators,Permanent Magnet Technology will never be the same. As a direct result of this technology, peripheral magnetic leakage is all but eliminated, directing the magnetic field straight down and creating a stronger magnet. These series of magnets are approximately 30% more powerful than competing units of the same size, and equivalent or superior to many sizes of Electro-Magnets, depending on the application. As a result of this increase in strength and the potential for use in extreme applications, Magnagense Wear Impact Plates are included, NOT as an option.