EZ-LIFT Lifting Magnets
Move the biggest loads with EZ-LIFT!
Applications
Use the EZ-LIFT to move plate steel, block or round steel, and iron material in your shop. Super-powerful lifting magnet requires no electricity. It's perfect for loading or unloading most workpieces including press molds, plastic molds, machined parts, etc. Rated for up to 4,400 lbs!
- Powerful magnet tested to hold OVER THREE TIMES the rated load for maximum safety
- Rated for loads up to 4,400 lbs.
- Eliminates dangerous straps and slings
- Fast, safe, efficient loading and unloading
- Use our handy application survey to help us determine the correct model for your lifting needs.
Note: On all our lifting magnets there is a built-in safety factor of 3.3 times the rated load. This means that the safety factor is 3.3 times the maximum rated load for each magnet. All Lifting Magnets need a safety rating; do not be misled by magnets without such. WARNING: Never lift more than the maximum rated load.
Operation
Simply move the lever to the "ON" position to engage the magnet. Spring-loaded lock keeps the magnet engaged until you release it.
|
|
 Lever in the "OFF" position. |
|||
| Maximum Rated Load Plate Steel | |||
| Model | Material | Maximum Rated Load |
Minimum Thickness |
| ELM-100 | plate steel | 220 lbs. | 0.59" |
| ELM-300 | plate steel | 660 lbs. | 0.98" |
| ELM-600 | plate steel | 1,320 lbs. | 1.18" |
| ELM-1000 | plate steel | 2,200 lbs. | 1.57" |
| ELM-2000 | plate steel | 4,400 lbs. | 2.16" |
| Maximum Rated Load Round Steel | ||||
| Model | Material | Maximum Rated Load |
Maximum Diameter | Maximum Length |
| ELM-100 | round steel | 99 lbs. | 5.9" | 40" |
| ELM-300 | round steel | 300 lbs. | 9.8" | 60" |
| ELM-600 | round steel | 600 lbs. | 13.8" | 80" |
| ELM-1000 | round steel | 990 lbs. | 17.8" | 98" |
| ELM-2000 | round steel | 1980 lbs. | 21.6" | 118" |
| Dimensions (inches) | |||||||||
| Model | A | B | C | D | E | F | G | H | Wt. |
| ELM-100 | 4.2" | 3.3" | 4.7" | 4.9" | 2.4" | 2.8" | 1.6" | 1.2" | 5.5 lbs. |
| ELM-300 | 7.1" | 6.1" | 6.1" | 7.3" | 3.6" | 3.7" | 2.0" | 1.6" | 18.9 lbs. |
| ELM-600 | 10.0" | 8.8" | 8.3" | 10.2" | 4.5" | 4.7" | 3.0" | 2.0" | 46 lbs. |
| ELM-1000 | 11.0" | 9.6" | 11.3" | 14.6" | 6.5" | 6.7" | 3.8" | 3.4" | 101 lbs. |
| ELM-2000 | 16.6" | 15.0" | 13.7" | 20.2" | 8.5" | 8.5" | 4.1" | 4.8" | 259 lbs. |
Lifting power depends upon carbon content of stock, stock thickness, and surface finish.
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||
Percent of Lifting Power (by thickness of material)
| Thickness | Depth | ELM-100 | ELM-300 | ELM-600 | ELM-1000 | ELM-2000 |
| T1 | 2.36 in | 100% | 100% | 100% | 100% | 100% |
| T2 | 2.16 in | 100% | 100% | 100% | 100% | 100% |
| T3 | 1.97 in | 100% | 100% | 100% | 100% | 95% |
| T4 | 1.77 in | 100% | 100% | 100% | 100% | 90% |
| T5 | 1.57 in | 100% | 100% | 100% | 100% | 85% |
| T6 | 1.38 in | 100% | 100% | 100% | 90% | 75% |
| T7 | 1.18 in | 100% | 100% | 100% | 80% | 65% |
| T8 | 0.98 in | 100% | 100% | 90% | 70% | 55% |
| T9 | 0.79 in | 100% | 90% | 75% | 60% | 45% |
| T10 | 0.59 in | 100% | 70% | 60% | 50% | 35% |
| T11 | 0.39 in | 70% | 50% | 45% | 35% | 25% |
| T12 | 0.20 in | 40% | 30% | 25% | 20% | 15% |
Calculation Example: ELM-600, rated lifting power is 1,320 lbs. The formula for calculating range of lifting capacity is: T x F x M x Capacity.
T = Thickness
F = Surface Finish
M = Material
ELM-600 Example: T8, F1 and M2
90% x 125% x 85% x 1,320 = 1,263 lbs