MagVISE Magnetic Workholding Blocks

  • MagVise Workholding Blocks

MagVISE Magnetic Workholding Blocks



Now you can perform custom workholding tasks without the “custom” cost!


  • powerful magnetic workholding
  • FASTEST – load and unload
  • reduce set-up times
  • machine 5-sides easily
  • machinable soft jaws
  • modular system grows with you
  • no workpiece distortion
  • better accuracy and repeatability
  • use on pallet or machine bed
  • maintenance free
SKU: ECB Category:

Switch-Connect Modular Units
By combining ECB Blocks you can quickly create custom workholding to fit a wide variety of workpiece sizes.

Quickly Load Your Workpiece

Use EZ-Lift lifting magnets together with the MagVISE magnetic workholding system to significantly reduce your load/unload and workpiece set-up times.

ON/OFF Switch
Switch positively engages magnets with a simple turn of the wrench.

Machine All Five Sides

It’s easy to perform complex 5-sided machining using the MagVISE. You can even machine on 5 sides while holding a large number of workpieces using an array of MagVISE blocks.

The machinable soft jaws permit workpiece nesting for improved accuracy over other workholding systems. Also, you can machine right through the part without affecting the workholding.

Model L x W x H A B Min. Stock
Holding Power Weight
ECB-050CN 5″/127mm x 3″/76mm x 3″/76mm .47″ .47″ 0.4″ 1,100 lbs 15 lbs.
ECB-075CN 6.8″/173mm x 3″/76mm x 3″/76mm .47″ .47″ 0.4″ 1,650 lbs 19 lbs.
ECB-120CN 7.3″/185mm x 4.2″/107mm x 4.2″/107mm .62″ .59″ 0.6″ 2,640 lbs 40 lbs.
ECB-210CBN 9.2″/234mm x 5.2″/132mm x 5.3″/135mm .65″ .84″ 0.8″ 4,620 lbs 80 lbs.
Additional machinable soft jaws are in stock if needed.

Click the button below to convert inches to mm:
Inch to MM Conversion Calculator


There are no reviews yet.

Be the first to review “MagVISE Magnetic Workholding Blocks”

Your email address will not be published. Required fields are marked *