Product Specification for
Permanent Magnetic Bullet Separators
| Operating Pressure | Suitable for operating pressures up to 15 PSI. |
| Operating Principle | Designed for installation in pipelines carrying grain or similar free flowing granular products. A cone on top of the magnet and deflectors on the inside of the casing ensure that the product has to impinge upon the body of the magnet where ferrous material will be retained. |
| Magnet System | Computer designed, rare earth or ceramic magnet system interposed with high permeability steel poles, sized to produce the optimum magnetic field. The magnets are surrounded with stainless steel tubes to protect from damage and to reduce contamination. The cone on top of the magnet is constructed of mild steel. |
| Magnet Mounting | Mounted on a support bracket attached to the pivoted door. When door is opened, magnet is exposed for cleaning. |
| Housing | Constructed entirely from 300 series non-magnetic stainless steel. Flanges are provided at inlet and outlet for connection into clients' pipework. The door is provided with seals and quick release toggle catches. |
| Standard Finish | One coat of high performance Alkyd air drying gray primer and one coat of high performance Alkyd air drying enamel. |
| Comprehensive installation, operation and maintenance manual supplied with each unit. | |
Return to the Bullet Magnet page